| Item |
Photo (Off) |
Description |
Bids |
High
Bidder |
Current
Amount |
Next Bid
Required |
Your
Bid |
Your
Maximum |
| 7 |
 | Sioux Valve Grinding Machine. S/n: D16713. Approx 36"x21"x57" Kanga Machinery Movers has quoted $50 for a basic lift and load of this item on Tuesday December 22nd. Please contact Jack upon the completion of the auction to make arrangements 701-899-0543. |
9 |
7692 |
235.00 |
|
ended |
| 10 |
 | 2005 CML Model SB48 Rotary Draw Tube and Pipe Bending Machine 2" Bending Capacity, 180 Degree Maximum Bending Angle, Remote Foot Switch, Assorted Dies, 110 Volt, S/N: 4905039. Note: Need new encoding card. |
23 |
18129 |
3,070.00 |
|
ended |
| 11 |
 | Scotchman Model GNDDE Pipe Notcher. 30 to 90 Degree Adjustable Angle, 2.5" Max Notch at 90 Degrees, 2" Max Notch at 45 Degrees, 1 1/2" Max Notch at 30 Degrees, 2950 SFPM Belt Speed, 3"x78 3/4" Belt, Dust Extractor, 5HP 230 Volt 3-Phase Motor and Controls, S/N: 0328035. |
15 |
19755 |
1,550.00 |
|
ended |
| 13 |
 | Esab Model Silhouette 1000-4 Plasma Cutter. 48"x144" Cutting Area, 48"x48" Tracing Area, (1) Torch, Model ESP-50 Power Unit, 50 Amp, 100 Volt Rated Output @ 100% Duty Cycle, 208/230 Volt Single or Three Phase, S/n: PC-J603002. Note: Needs new main board. |
20 |
9011 |
1,425.00 |
|
ended |
| 45 |
 | Clausing-Metosa Model C1440 Engine Lathe. 14"x40" Rated Capacity, 14.17" Actual Swing over Bed, 8" Swing Over Cross Slide, 40" Between Centers, 1.65" Hole Thru Spindle, (18) Spindle Speeds: 30 to 2,000 RPM, Standard and Metric Threading, D1-5 Spindle Nose, Steady Rest, Change Gears, Chip Pan, 3HP 3-Phase Motor and Controls, S/N: 22117. Approx 80"x36"x51" and 2,500 lbs. Kanga Machinery Movers has quoted $375 for a basic lift and load of this item on Tuesday December 22nd. Please contact Jack upon the completion of the auction to make arrangements 701-899-0543. |
16 |
10531 |
3,300.00 |
|
ended |
