| Item |
Photo (Off) |
Description |
Bids |
High
Bidder |
Current
Amount |
Next Bid
Required |
Your
Bid |
Your
Maximum |
| 1 |
 | Clausing Model 2276, Single Spindle Drill Press, 18" x 15-1/2" T-Slotted Table, 10" Throat, No. 3 Morse Taper Spindle, Variable Spindle Speeds: 150 to 2,000 RPM, 6" Quill Travel, Table Elevation Mechanism, 1-1/2 HP, Three Phase Motor and Controls, s/n 516177 with Clausing Model 2217 Attachment R&R Machinery Moving has quoted $100 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
14 |
21253 |
1,051.00 |
|
ended |
| 7 |
 | Antares Model FSS12 Single Lip Tool Grinder, 3-3/4'' Wheel Capacity, with (9) Assorted Collets, Drill Grinder Attachment, 3450 RPM, 1/2 Horsepower Single Phase, s/n 11.075 |
15 |
16406 |
345.00 |
|
ended |
| 15 |
 | Enshu Model VMC430, Vertical Machining Center, 16.55" x 43.34" T-Slotted Table, 29.94" X-Travel, 16.94" Y-Travel, 20.09" Z-Travel, 26.4" Maximum Spindle to Table, 1,100 Lb Table Capacity, CAT-40 Spindle Taper, 4,000 Maximum RPM, 20-Tool Automatic Tool Changer, Fanuc 11-M CNC Controls, Table Guards, Coolant, 7.5 HP, Three Phase Motor and Controls, s/n 192, Approx: 84" x 100" x 108" and 11,500 Lbs, Please Note: Tool Holders and Vises are NOT Included
 R&R Machinery Moving has quoted $400 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
26 |
7953 |
4,602.00 |
|
ended |
| 20 |
 | Intercont Products Model SJW-2, Heated Parts Washer, 26-1/2" Diameter x 6" Tall Rotating Basket, Side and Overhead Sprayers, Approx 35" from Bottom of Basket to Overhead Sprayers, Time and Heat Controls, Single Phase Motor and Controls, s/n N7016860, Approx: 48" x 48" x 64" R&R Machinery Moving has quoted $75 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
18 |
6051 |
1,750.00 |
|
ended |
| 25A |
 | Brother Model BT1-203, "Hi-Tap", Single Spindle Tapping Maching, 9" x 9" T-Slotted Table, 6-1/2" Throat, 3-Spindle Speeds: 500, 900, and 1,600 RPM, with Change Gears and Assorted Tap Collets, Coolant Tank and Pump, Approx 1/3 HP, Three Phase Motor and Controls, on Metal Bench with Casters, s/n 127614 R&R Machinery Moving has quoted $50 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
10 |
12523 |
725.00 |
|
ended |
| 30 |
 | Bridgeport Vertical Milling Machine, 9" x 42" T-Slotted Table, 24" Longitudinal Table Travel, 12" Cross Table Travel, 13" Vertical Adjustment of Knee, Qwik-Change 40-Taper Spindle Taper, Variable Speeds: 60 to 4,200 RPM, One-Shot Lube, Align Longitudinal Power Feed, Acu-Rite "Qwik-Count" 2-Axis DRO (X-not functional), 1-1/2 HP, Three Phase Motor and Controls, s/n 160914, Approx: 62" x 62" x 83" and 2,500 Lbs, Please Note: Tool Holders and Vises are NOT Included R&R Machinery Moving has quoted $100 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
25 |
7432 |
2,700.00 |
|
ended |
| 45 |
 | H.E.S. Model 550, Engine Lathe, 20" x 63" Rated Capacity, 21-5/8" Swing Over Bed in Front of Face Plate, 19-3/4" Swing Over Bed, 12-1/4" Swing Over Cross Slide, 13-1/4" Cross Slide Travel, 6-1/8" Tool Slide Travel, Power Carriage and Cross-Slide Movement, 2-1/16" Hole Thru Spindle, 18-Spindle Speeds: 36 to 1,800 RPM, 28-Longitudinal Feeds: .002" to .028", 28-Transverse Feeds: .0015" to .018", Standard and Metric Threading, Acu-Rite III Single Axis DRO, Tailstock, Steady Rest, Tracer Attachment, 12" 3-Jaw Chuck, Enco Tool Post Tool Holder with 2-Holders, Chip Pan, Coolant, 10 HP, Three Phase Motor and Controls, s/n 13601, Approx: 138" x 56" x 70" and 6,900 Lbs R&R Machinery Moving has quoted $250 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
15 |
9917 |
5,101.00 |
|
ended |
| 50 |
 | Versa-Tap 12 Tapping Machine, 36-1/4'' x 18-1/4'' Drilled and Tapped Table, 32'' Longitudinal Travel, 17'' Cross Table Travel, Vertical Adjustment of Head, Single Spindle with Tapmatic Model SPD-5 Tapping Attachment with #6 - 1/2'' Capacity, Overhead Lighting, on Casters, 3/4 Horsepower, Single Phase Motor and Controls, s/n K209, Appx. 84 x 45 x 96'', 1200 Lbs |
6 |
21180 |
265.00 |
|
ended |
| 55 |
 | Sterling Model DG, Pedestal Drill Grinder, Will Grind 1/8" to 2-1/2" Diameter Drills, 2, 3, and 4 Flute Drills, 6" Diameter Wheel Capacity, 3/4 HP, Single Phase, s/n DG40517 |
34 |
6051 |
1,259.00 |
|
ended |
| 60 |
 | Wotan Model B75/105M, Horizontal Boring Machine, Table Type, 39-1/4" x 31-7/8" T-Slotted Table with 360 Degree Manual Rotation, Approx 3" Spindle Diameter, NMTB #40 Spindle Taper, 22-1/4" Longitudinal Travel of Spindle, 39" Vertical Headstock Travel, 52-1/4" Longitudinal Table Travel, 30-1/2" Cross Table Travel, 3,200 Lb Table Capacity, 20-Spindle Speeds: 16 to 1,250 RPM, 27-Feeds: .0008" to .333", Acu-Rite 3-Axis DRO, 10 HP, Three Phase Motor and Controls, s/n 60132, Approx: Machine: 108" x 168" x 113" and 21,500 Lbs and Control Box Approx: 72" x 20" x 78", Please Note: Tool Holders and Vises are NOT Included
R&R Machinery Moving has quoted $1,200 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
42 |
1618 |
10,400.00 |
|
ended |
| 67 |
 | Supermax Model 4CM-40 CNC Vertical Milling Machine, 9'' x 49'' T-Slotted Table, 27-3/4'' x-travel, 15-1/2'' y-travel, 5'' z-travel, 16'' Vertical Knee Adjustment, NST #40 Spindle Taper, Variable Speed, 60 to 4200 RPM, Centurion V CNC Controls, Coolant, Chip Pan, Kurt Power Draw Bar, Auto Lube, 3 Horsepower Three Phase Motor and Control, s/n 008428 [New 1993], Appx. 66 x 72 x 94'', 3000 Lbs., Please Note: Tool Holders and Vises are NOT Included
R&R Machinery Moving has quoted $150 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
22 |
9514 |
3,200.00 |
|
ended |
| 75 |
 | Quincy Model 5120-A, Recipricating Type Air Compressor, 25 HP, Approx 110 CFM, 200-Gallon Horizontal Receiver Tank, with Motor Silencers, Three Phase Motor and Controls, s/n 6217909, Approx: 85" x 44" x 94" R&R Machinery Moving has quoted $150 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
21 |
6051 |
1,002.00 |
|
ended |
| 90 |
 | LeBlond Makino Model FNC106/A30, Vertical Machining Center, 55-1/16" x 23-5/8" T-Slotted Table, 41-5/16" X-Travel, 23-5/8" Y-Travel, 22" Z-Travel, 30-7/8" Maximum From Spindle to Table, 3,300 Lb Table Capacity, CAT-50 Spindle Taper, 7,000 Maximum RPM, 30-Tool Automatic Tool Changer, Fanuc System 6M CNC Controls, Table Guards, Coolant, 10 HP, Three Phase Motor and Controls, s/n LM040, Approx: 112" x 138" x 132" and 21,500 Lbs, Please Note: Tool Holders and Vises are NOT Included
R&R Machinery Moving has quoted $850 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
32 |
22573 |
5,100.00 |
|
ended |
| 95 |
 | Miller Model 'Two Fifty Twin' AC/DC Arc Welding Power Supply, Rated Output at 30% Duty Cycle: 30 Volts, 250 Amps, 78 Max DCV, High/Low, Adjustable Amperage, Electrode Holder, Ground Clamp, Single Phase, s/n HE766610, Appx. 21 x 31 x 33'' |
12 |
22523 |
191.00 |
|
ended |
| 100 |
 | Powerteam 55-Ton Hydraulic Shop Press, 3" Diameter Ram on Skate, 36" x 14" Work Area, 36" Between Posts, Adjustable Height Bed, 71" Tall Posts, with Powerteam PQ120 Hydraulic Pump with Pendant Control, Pressure Guage, 3 HP, Three Phase s/n na, R&R Machinery Moving has quoted $50 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
21 |
20334 |
3,715.00 |
|
ended |
| 101 |
 | Leonard Model M350, "Grind-R-Lap", Single End Grinding/Lapping Machine, 5" Diameter Wheel Capacity, 12" x 4-3/4" Tilting Utility Table, Single Phase Motor and Controls, on Stand, s/n 84189-79 |
10 |
11541 |
80.00 |
|
ended |
| 105 |
 | Wells No. 8, Horizontal Band Saw, 8" x 20" Rated Capacity, 8" Round Capacity, 3-Blade Speeds, 3/4" Blade, 14" Wheel Diameter, Coolant Tank, Angle Vise, Work Stop, Gravity Downfeed, 3/4 HP, Three Phase Motor and Controls, s/n 20268, Approx: 84" x 52" x 48" and 1,000 Lbs R&R Machinery Moving has quoted $75 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
20 |
19998 |
603.00 |
|
ended |
| 120 |
 | New 2001Bridgeport Model VMC1000-30, Vertical Machining Center, 45.3" x 19.3" T-Slotted Table, 40.2" X-Travel, 20.1" Y-Travel, 19.7" Z-Travel, 24.8" Maximum From Spindle to Table, 1,980 Lb Table Capacity, CAT-40 Spindle Taper, 6,000 Maximum RPM, 30-Tool Automatic Tool Changer, GE Fanuc Series 18i-M CNC Controls, Full Enclosure, Coolant, Rigid Tapping, 4th Axis Capability, 30 HP, Three Phase Motor and Controls, s/n 822672, Approx: 115" x 100" x 115" and 10,500 Lbs, Please Note: Tool Holders and Vises are NOT Included
R&R Machinery Moving has quoted $350 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
41 |
21537 |
11,250.00 |
|
ended |
| 122 |
 | Delta Model 23-680, Double End Pedestal Grinder, 6" Diameter Wheel Capacity, 3,500 RPM, 1/4 HP, Single Phase Motor and Controls, s/n P9717 |
6 |
18136 |
77.00 |
|
ended |
| 130 |
 | Grob Model 4V-18, Vertical Band Saw, 24" x 28" Plain Tilting Table, 18" Throat, 9" Maximum Under Blade Guides, 3/4" x 150" Blade, Adjustable Blade Speeds: 50 to 4,500 FPM, with Grob Type RW-A, Blade Welder and Grinder, 1-1/2 HP, Three Phase Motor and Controls, s/n 1933, Approx: 48" x 48" x 78" and 1,500 Lbs R&R Machinery Moving has quoted $100 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
37 |
15682 |
2,000.00 |
|
ended |
| 135 |
 | SuperMax Model YCM-VMC-60A "Max 1", Vertical Machining Center, 36.22" x 12.59" T-Slotted Table, 23.6" X-Travel, 15.74" Y-Travel, 18.11" Z-Travel, 23.03" Maximum From Spindle to Table, 600 Lb Table Capacity, BT-35 Spindle Taper, 6,000 Maximum RPM, 16-Tool Automatic Tool Changer, Fanuc 11M CNC Controls, Table Guards, Coolant, 7.5 HP, Three Phase Motor and Controls, s/n 08273, Approx: 84" x 84" x 96" and 7,500 Lbs, Please Note: Tool Holders and Vises are NOT Included
R&R Machinery Moving has quoted $300 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
15 |
21036 |
2,530.00 |
|
ended |
| 141 |
 | Removed by SellerBaldor Double End Pedestal Carbide Grinder, 6" Diameter Wheel Capacity, 12" x 4" Tilting Utility Tables, 3,600 RPM, 1/2 HP, Single Phase, s/n na, Approx: 27" x 18" x 51" |
|
|
|
|
ended |
| 141A |
 | Baldor Cat. No. 1215W, Double End Pedestal Grinder, 12" x 2" Maximum Wheel Size, Utility Tables, 1,725 RPM, 2 HP, Three Phase Motor and Controls, s/n 274 |
28 |
17950 |
311.00 |
|
ended |
| 143 |
 | Rockwell Model 31-122, 12" Disc Grinder, 16-1/4" x 7" Tilting Utility Table, 1,740 RPM, Single Phase, s/n FZ7805 |
23 |
21534 |
445.00 |
|
ended |
| 150 |
 | Hardinge Model DV-59, Second Operation Lathe, 9" Swing Over Bed, 18" Maximum From Spindle to Turret Face, 1-1/16" Round Collet Capacity, 1-1/4" Hole Thru Spindle, Variable Speeds: 0 to 3,500 RPM, 6-Position Turret, 5/8" Holes in Turret, 5C Collet Closer, Production Cross Slide, Chip Pan, Back Chip and Chuck Guard, Coolant Tank and Pump, 1-1/2 HP, Three Phase Motor and Controls, s/n DV-59-13494, Approx: 66" x 36" x 70" and 2,000 Lbs R&R Machinery Moving has quoted $75 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
21 |
17739 |
3,100.00 |
|
ended |
| 165 |
 | Giddings & Lewis Model 15U "NumeriLathe", 2-Axis Universal Combination Turning Center, 22-1/2" Swing Over Way Covers, 33-1/2" Z-Travel, 19" X-Travel, 35-1/2" Maximum Distance from Spindle Flange to Turret A, 32" Maximum Distance from Spindle Flange to Turret B, 33" Maximum Between Centers, 49-3/4" Maximum from Spindle Flange to Tailstock Center, 14-Tool Stations on (2) Turrets, 5.18" Spindle Bore, G&L NumeriPath 8000B CNC Controls with CRT, 15" 3-Jaw Chuck, Coolant, Chip Conveyor, 40 HP, Three Phase Motor and Controls, s/n 532-31-77, Approx: 17' x 8' x 7' and 27,000 Lbs
R&R Machinery Moving has quoted $1,400 for control box disconnect, lift,and load. |
7 |
22158 |
601.00 |
|
ended |
| 180 |
 | Landis Model "Abrasive" No. 1-1/2, Hoorizontal Spindle Surface Grinder, 10" x 15" Rated Capacity, 16" Longitudinal Table Travel, 10-1/2" Cross Table Travel, 12" Maximum Under Spindle, 12" Maximum Wheel Diameter, Hand Feeds, 10" x 15" Permanent Magnetic Chuck, Coolant Tank and Pump, 2 HP, Three Phase Motor and Controls, s/n 126-20, Approx: 62" x 50" x 82" and 1,900 Lbs R&R Machinery Moving has quoted $150 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
8 |
14480 |
625.00 |
|
ended |
| 184 |
 | Rockwell Model 31-710, Combination Belt/Disc Sander, 6" Wide Belt Capacity, No Table on Belt Sander, 12" Disc Capacity with 16-1/4" x 7" Tilting Table, Three Phase Motor and Controls, s/n IG8161, Approx: 32" x 37" x 46" and 250 Lbs |
22 |
21397 |
575.00 |
|
ended |
| 190A |
 | Continental Model DP14-500, Single Spindle Drill Press, Bench-Top Type, 9-1/2" x 9-1/2" T-Slotted Table, 7" Throat, No. 2 Morse Taper Spindle, 5/8" Capacity, 12-Belted Speeds: 260 to 3,650 RPM, Table Elevation Mechanism, 1/2 HP, Single Phase, s/n D0291 |
18 |
20641 |
110.05 |
|
ended |
| 195 |
 | Quincy Model 325-B, Recipricating Type Air Compressor, 5 HP, Approx 22 CFM, 120-Gallon Horizontal Receiver Tank, Three Phase Motor and Controls, s/n 826167-5, Approx: 72" x 25" x 65" R&R Machinery Moving has quoted $125 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
13 |
7511 |
350.00 |
|
ended |
| 200 |
 | Delta-Rockwell 4-Spindle Drill Bank, 54" x 18-1/4" Plain Production Table, 7" Throat, Including (4) 15-665 Series Single Spindle Drill Heads, Including: (2) 6-Speed: 425 to 5,500 RPM, (1) 280 to 3,635 RPM and (1) Unknown, (3) with 1/2" Drill Chucks and (1) with Tapmatic 50X Tapping Attachment, 1/2 HP, s/n 1594678 R&R Machinery Moving has quoted $100 for a basic lift and load of this item. Please contact Brian with any questions at 612-770-2598. |
16 |
11064 |
625.00 |
|
ended |
| 205 |
 | Zeks Model 100-ACHA-100, After Cooler, 1/6 HP, 16" Diamter Fan, Single Phase, s/n 112194-10, Approx: 33" x 20" x 45" |
6 |
20641 |
28.50 |
|
ended |
| 260 |
 | JET Model JSG-1, 1" Belt Sander, Tilting Utility Table, 3/4 HP, Single Phase, On Cart |
11 |
22500 |
133.00 |
|
ended |
