| Item |
Photo (Off) |
Description |
Bids |
High
Bidder |
Current
Amount |
Next Bid
Required |
Your
Bid |
Your
Maximum |
| 60 |
 | Mori-Seiki Model SL-5C Turning Combination Center. 24.4" Swing Over Bed, 15.7" Maximum Machining Diameter, 43.3" Between Centers, 4.1" Hole Thru Spindle, 10-Position Turret, Variable Spindle Speeds: 20 to 2,000 RPM, 12" 3-Jaw Chuck, Chip Conveyor, 29HP Spindle Motor, Fanuc Series 10T CNC Control, S/N: 1067 (New 1988) Approx 239"x79"x96" Transformer and turret tooling not included with machine. Video Available! Click on lot to view. LaVenture Crane and Rigging has quoted $1,400 to lift and load this item on scheduled removal days. Additional services including trucking and storage are available. Please call Jim with rigging related questions 651-308-1801. |
18 |
6627 |
6,800.00 |
|
ended |
| 100 |
 | Fortuna Model FM43G450 CNC Cylindrical Grinder. Approx 14"x36" Capacity, 30"x4"x12" Maximum Wheel Size, Form Dresser, Coolant System with Paper Filtration, Programming Manual, Electrical Drawings, Fortuna FM4 CNC Control, 460 Volt 3-Phase Electrics S/N: 15821. Approx 170"x154"x97" Video Available! Click on lot to view. LaVenture Crane and Rigging has quoted $3,280 to lift and load this item on scheduled removal days. The quoted price will decrease if it is possible to load this machine without a crane. Additional services including trucking and storage are available. Please call Jim with rigging related questions 651-308-1801. Due to a delay in the delivery of a new machine, this grinder will be available to the winning bidder no later than March 4th 2010. Bosch will continue to use the machine on a limited basis. The machine will be in the same condition when it is released as it is during the auction. Hoff-Hilk Auction Sercies will require a 20% deposit during the posted payment dates with the remainder due upon removal of the machine. If the grinder is not available by March 4th 2010 buyer may stop the transaction and be entitled to a refund of his deposit. |
10 |
7790 |
1,050.00 |
|
ended |
| 160 |
 | Monarch Model VMC-75 Vertical Machining Center. 21"x48 7/8” T-Slotted Table, 40" X-Axis Travel, 20" Y-Axis Travel, 21" Vertical Head Travel, 10" Quill Travel, 26 1/2" Throat, 30 3/4" Max Under Spindle Nose, Monarch 45 Taper in Spindle, (80) Spindle Speeds: 45 to 3,500 RPM, 60-Position Automatic Tool Changer, Chip Auger, 7 1/2 HP Motor, Fanuc Series 11M CNC Control, S/N: 89047. Approx 130"x180"x132" and 16,000 lbs. Note: Includes Approximately (40) Tool Holders. Does not included vise bodies seen in photos. Video Available! Click on lot to view. LaVenture Crane and Rigging has quoted $1,860 to lift and load this item on scheduled removal days. Additional services including trucking and storage are available. Please call Jim with rigging related questions 651-308-1801. |
15 |
22516 |
676.99 |
|
ended |
| 180 |
 | Mori-Seiki Model SL-3 Combination Turning Center. 16" Swing Over Bed, 18" Maximum Machining Length, 2.04 Hole Thru Spindle, Variable Spindle Speeds: 35 to 3,200 RPM, 8-Position Turret, A1-6 Spindle Nose, Collet Chuck, Tailstock, Chip Conveyor, Parts Catcher, Coolant, 15HP Spindle Motor, Fanuc Series 10TE CNC Control, S/N: 4663 (New 1985) Approx 152"x94"x78" and 10,000 lbs. Note: Bar Feeder Available. See Item 210
Note: Transformer not included with machine. Video Available! Click on lot to view. LaVenture Crane and Rigging has quoted $1,400 to lift and load this item on scheduled removal days. Additional services including trucking and storage are available. Please call Jim with rigging related questions 651-308-1801. |
11 |
16142 |
1,251.00 |
|
ended |
| 210 |
 | LNS "Hydro Bar" Bar Feeder. Approx 15' Bar Capacity, (6) Tubes, S/N: na. Approx 218"x55"x58" LaVenture Crane and Rigging has quoted $250 to lift and load this item on scheduled removal days. Additional services including trucking and storage are available. Please call Jim with rigging related questions 651-308-1801. |
38 |
12960 |
1,650.00 |
|
ended |
| 220 |
 | Chevalier Model CG-1240A Cylindrical Grinder. 12"x40" Rated Capacity, Acu-Rite 1-Axis DRO, Coolant System with Magnetic Separator and Paper Filtration. S/N: GF49903 (New 1999) Approx 150"x106"x64" and 8,000 lbs. Video Available! Click on lot to view. LaVenture Crane and Rigging has quoted $500 to lift and load this item on scheduled removal days. Additional services including trucking and storage are available. Please call Jim with rigging related questions 651-308-1801. |
18 |
6627 |
3,500.00 |
|
ended |
