| Item |
Photo (Off) |
Description |
Bids |
High
Bidder |
Current
Amount |
Next Bid
Required |
Your
Bid |
Your
Maximum |
| 1 |
 | New 2003 Sharp Model LMV-50 3-Axis CNC Vertical Milling Machine, 9" x 50" T-Slotted Table, 35" X-Travel, 15 Y-Travel, 5" Z-Travel, 10-1/2" Vertical Knee Adjustment, R8 Spindle Taper, Variable Speed: 60 to 4,500 RPM, Acu-Rite Mill Power 2 CNC Controls, Kurt Power Draw Bar, Coolant, One Shot Lube, 3 HP, Three Phase Motor and Controls, s/n 00404436, Approx: 84" x 78" x 88" and 3,000 Lbs. Kanga Machinery Movers has quoted $175 for basic lift and load of this item. Please call Jack at 701-899-0543 with any questions.
Video Available! Click on Lot to View |
51 |
6299 |
10,000.00 |
|
ended |
| 2 |
 | Kurt Model D688 'Anglock' 6'' Precision Machine Vise, s/n D688-59145 |
19 |
18421 |
255.00 |
|
ended |
| 3 |
 | (4) HPI Model CT40-ER25-75 CAT-40 Collet Holders, with (15) ER-25 Series Collets, and (1) Collet Wrench |
25 |
6979 |
430.00 |
|
ended |
| 3A |
 | Please click on this lot for Rigging Information. |
|
|
|
|
ended |
| 3B |
 | UPS Shipping Available for small items Click here for more information. |
|
|
|
|
ended |
| 3C |
 | This auction features EXTENDED BIDDING! View this lot to learn more. |
|
|
|
|
ended |
| 3D |
 | How much time is left? |
|
|
|
|
ended |
| 3E |
 | This auction STARTS TO CLOSE at 10:00 AM CDT at a rate of 3 lots per minute. Click this lot to learn more. |
|
|
|
|
ended |
| 3F |
 | Click on this lot to learn more about preview dates and times. |
|
|
|
|
ended |
| 3G |
 | Click on This Lot For Important Removal Information |
|
|
|
|
ended |
| 4 |
 | Assorted Carbide End Mills, Sizes up to 1/2'' |
10 |
22836 |
79.00 |
|
ended |
| 5 |
 | Index of R8 Collets, (13) Total, 1/8'' - 3/4'', with Collet Rack |
8 |
8084 |
100.78 |
|
ended |
| 6 |
 | (3) No. 4 Morse Taper Coolant Through Spade Drills with Assorted Cutting Inserts |
12 |
12767 |
135.00 |
|
ended |
| 7 |
 | (2) Huot 3-Drawer Drill Cabinets, 14-3/4 x 7-3/8 x 7-7/8'' Each, with Fractional Drills, 1/16'' - 1/2'' |
17 |
22727 |
326.00 |
|
ended |
| 8 |
 | 24''/60cm Stainless Steel Height Gage, .001''/.02mm, with case |
5 |
22443 |
42.50 |
|
ended |
| 9 |
 | Dynafile Model DP6 Pneumatic Belt Sander, 1/2'' x 24'' Belt, s/n 4057 |
11 |
22727 |
130.01 |
|
ended |
| 10 |
 | New 2005 Miller Model Dynasty 300DX Tig Welding Power Supply, Rated Output @ 15% Duty Cycle: 300 Amps and 22 Volts, Adjustable Output, Touch Pad Controls, 115 Volt Auxiliary Power Supply, Tig Torch, Ground Clamp, Foot Pedal, Single Phase, s/n LF348300 with Miller Coolmate 3, Welding Chiller, s/n LF450058F, and Miller Tig Runner Welding Cart, Appx. 32 x 18 x 38'', 200 Lbs. |
18 |
22834 |
4,055.00 |
|
ended |
| 11 |
 | Kurt Model D688 'Anglock' 6'' Precision Machine Vise, s/n D688-50898 |
14 |
22724 |
250.00 |
|
ended |
| 12 |
 | Baldor Catalog Number 333B Double End Bench/Pedestal Buffer, 3/4 Horsepower, 3600 RPM Motor, Single Phase, s/n X0608217019 |
20 |
16539 |
396.00 |
|
ended |
| 13 |
 | (5) Vise Grip Clamps; (4) Model 11R, (1) Model 11SP |
9 |
22727 |
37.50 |
|
ended |
| 14 |
 | Appx. (50) Assorted HSS Straight Shank Counter Bores, #300-4 to 14mm |
7 |
22503 |
44.11 |
|
ended |
| 15 |
 | Craftsman Professional Series Model 919.165512 2-Stage Air Compressor, 12.8 CFM, 175 psi, 7.0 Max Horsepower, 2.9 Running Horsepower, New 2005, s/n 2503010144, with 60-Gallon Tank Kanga Machinery Movers has quoted $35 for basic lift and load of this item. Please call Jack at 701-899-0543 with any questions. |
14 |
9861 |
419.00 |
|
ended |
| 16 |
 | (30) Assorted 5C Collets, with Collet Rack |
12 |
21379 |
89.01 |
|
ended |
| 18 |
 | Dewalt Right Angle Die Grinder with 6-3/4'' Diameter Grinding Wheel, 8500 RPM Max |
8 |
22777 |
21.05 |
|
ended |
| 19 |
 | Appx. (15) Assorted Steel C-Clamps, 2'' - 10'' |
16 |
6599 |
81.00 |
|
ended |
| 20 |
 | Enco Model 111-1658, Removable Gap Bed Engine Lathe, 16" x 58" Rated Capacity, 15-3/4" Maximum Swing Over Bed, Approx 21" Swing in Gap, 60" Maximum Between Centers, 8-3/4" Swing Over Cross Slide, 2-1/4" Hole Thru Spindle, 15-Speeds: 22 to 1,800 RPM, Metric and Standard Threading, Tailstock, Chip Pan, Coolant, Chuck Guard, 12-1/4" 3-Jaw Chuck, 12-3/4" 4-Jaw Chuck, Newall DP7 2-Axis DRO, Approx 7-1/2 HP, Three Phase Motor and Controls, s/n 937000, Approx: 112" x 48" x 71" and 5,500 Lbs Kanga Machinery Movers has quoted $375 for basic lift and load of this item. Please call Jack at 701-899-0543 with any questions. |
44 |
22484 |
3,461.00 |
|
ended |
| 21 |
 | Kurt Model D688 'Anglock' 6'' Precision Machine Vise, s/n D688-50895 |
17 |
22724 |
240.00 |
|
ended |
| 22 |
 | Gage Block Set, Grade 2, No. 060031, .050 - 4'', Complete Set with Case |
9 |
17785 |
112.00 |
|
ended |
| 23 |
 | Central Machinery Model T6852 Combination Sander, 6'' x 24'' Vertical Belt, 9'' Diameter Disc, 12-3/8'' x 6-3/8'' Table, Single Phase, s/n 02130301936, with (6) Spare Belts |
21 |
22826 |
325.00 |
|
ended |
| 24 |
 | Assorted R8 End Mill Holders |
9 |
10684 |
70.00 |
|
ended |
| 25 |
 | Heavy Duty 14' Overhead Door, 3'' Tracks and Rollers, with Hardware and New Set of Springs. Kanga Machinery Movers has quoted $35 for basic lift and load of this item. Please call Jack at 701-899-0543 with any questions. |
11 |
15887 |
211.00 |
|
ended |
| 26 |
 | Assorted Carbide End Mills, Sizes up to 1/2'' |
10 |
15666 |
78.00 |
|
ended |
| 27 |
 | (2) Huot 3-Drawer Drill Cabinets, 14-3/4 x 7-3/8 x 7-7/8'' Each, (1) with Metric Taps, 3mm x 0.50 - 24mm x 3.0, (1) with Fractional Taps, 1/4''-20 to 1''-12 |
10 |
22727 |
236.00 |
|
ended |
| 28 |
 | PRV Style Exhaust Fan, 208-230/460V 3-Phase, Appx. 54'' Diameter and 48'' Tall/Deep. Kanga Machinery Movers has quoted $20 for basic lift and load of this item. Please call Jack at 701-899-0543 with any questions. |
1 |
22777 |
1.20 |
|
ended |
| 29 |
 | Hundreds of HSS Drills, up to 1/2'' |
10 |
14400 |
105.00 |
|
ended |
| 30 |
 | Bridgeport Series I Vertical Milling Machine, 9" x 42" T-Slotted Table, 24" Longitudinal Table Travel, 12" Cross Table Travel, 13" Vertical Knee Adjustment, R8 Spindle Taper, Variable Speeds: 60 to 4,200 RPM, Newall Topaz 2-Axis DRO, Mitutoyo Digital Quill Indicator, Longitudinal Power Feed, Coolant, Speedy Power Draw Bar, One Shot Lube, 2 HP, Three Phase Motor and Controls, s/n 237098, Approx: 100" x 65" x 81" and 2,500 Lbs. Kanga Machinery Movers has quoted $150 for basic lift and load of this item. Please call Jack at 701-899-0543 with any questions. |
21 |
12767 |
3,455.00 |
|
ended |
| 31 |
 | Kurt Model D688 6'' Precision Machine Vise, with 9-1/2'' Shop Made Jaws, s/n D688-59153 |
12 |
18421 |
230.00 |
|
ended |
| 33 |
 | Assorted HSS End Mills, up to 1-1/4'' |
12 |
7383 |
75.00 |
|
ended |
| 34 |
 | Appx. (20) Assorted R8 Collets |
6 |
16539 |
66.00 |
|
ended |
| 35 |
 | (2) 14-3/4 x 7-3/8 x 7-7/8'' Drill Cabinets, (1) 3-Drawer with Lettered Drills, A-Z, and (1) 5-Drawer with Numbered Drills, 12-60 |
13 |
22727 |
230.00 |
|
ended |
| 36 |
 | Assorted Drills, Long and Jobber Length, up to 1/2'' |
9 |
12738 |
48.50 |
|
ended |
| 37 |
 | Cantilever Style Stock Rack. (15) Total Arms, (12) 24'' Long, (3) 42-1/2'' Long, 48'' Long Feet. 62 x 192 x 120'' Overall |
15 |
22777 |
415.00 |
|
ended |
| 38 |
 | (2) Criterion No. DBL-203 Boring Heads, (1) on R8 Shank, (1) on 1'' Straight Shank |
15 |
12235 |
190.00 |
|
ended |
| 39 |
 | (4) Kant Twist Style Clamps, (2) Kant Twist Model No. 6D421 6'', and (2) Other 6'' |
12 |
22727 |
103.00 |
|
ended |
| 40 |
 | Clausing Model 22V Single Spindle Drill Press, 18" x 80" Plain Production Table, 9" Throat, No. 3 Morse Taper Spindle, Jacobs 18N Drill Chuck, Variable Speeds: 150 to 2,000 RPM, Drill Head Elevation Mechanism, 1-1/2 HP, Three Phase Motor and Controls, s/n 502513, Approx: 90" x 36" x 78" and 2,000 Lbs. Kanga Machinery Movers has quoted $75 for basic lift and load of this item. Please call Jack at 701-899-0543 with any questions. |
12 |
14400 |
590.00 |
|
ended |
| 41 |
 | Kurt Model D688 'Anglock' 6'' Precision Machine Vise, s/n D688-61457 |
17 |
6299 |
330.00 |
|
ended |
| 42 |
 | Central Machinery Model T6852 Combination Sander, 6'' x 24'' Vertical Belt, 9'' Diameter Disc, 12-3/8'' x 6-3/8'' Table, 1 Horsepower, 3450 RPM Motor, Single Phase, s/n 1115519, with Clamping Fixture |
15 |
22833 |
200.00 |
|
ended |
| 43 |
 | R8 Collet Index, 1/8'' - 13/16'', (26) Total Collets, with Stand |
11 |
6299 |
140.00 |
|
ended |
| 44 |
 | Assorted Acme Thread Taps, up to 1.25'' - 5 |
11 |
17632 |
124.50 |
|
ended |
| 45 |
 | Lot of Assorted HSS End Mills, Many New, up to 3/4'' |
12 |
22759 |
160.00 |
|
ended |
