| Item |
Photo (Off) |
Description |
Bids |
High
Bidder |
Current
Amount |
Next Bid
Required |
Your
Bid |
Your
Maximum |
| 480 |
 | Nakamura-Tome Model Slant Jr, CNC Combination Turning Center, 15.75" Swing Over Slide Covers, 11.02" Swing Over Saddle, 11.81" Maximum Turning Length, 18.98" Maximum Between Centers, 1-5/8" Round Bar Capacity, 2.17" Hole Thru Spindle, 10-Position Turret, 4,500 Maximum RPM, Fanuc O-T CNC Controls, Tape Reader, Tailstock, Coolant, Chip Conveyor, 10 HP, Three Phase Motor and Controls, s/n 17311, Approx: 110" x 52" x 65" and 5,700 Lbs R&R has quoted $300 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
18 |
22418 |
4,101.00 |
|
ended |
| 520 |
 | Hardinge Model Conquest 42, Combination CNC Combination Turning Center, 19-1/2" Swing Over Upper Way Cover, 14-1/2" Swing Over Lower Way Cover, 14" Maximum Distance From Spindle Face to Turret Face, 12-Position Turret, 1-7/8" Hole Thru Spindle, 5,000 RPM Spindle, GE Fanuc OT CNC Controls, RS232 Port, 6-1/2" 3-Jaw Chuck, Partial Parts Catcher, Coolant, Chip Coveyor, Partial Tailstock, 7-1/2 HP, Three Phase Motor and Controls, s/n CS0008220-AK, New 1989, Approx: 136" x 56" x 69" and 7,500 Lbs R&R has quoted $300 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
13 |
22418 |
2,600.00 |
|
ended |
| 550 |
 | Mazak Model H-400, CNC Horizontal Machining Center, (2) 15.7" x 15.7" T-Slotted Pallets, 22.05" X-Travel, 18.11" Y-Travel, 20.08" Z-Travel, 19.30" Maximum Distance From The Center of Spindle to the Stop Surface of the Pallet, 24.02" Maximum from Spindle End to the Center of Pallet, CAT-40 Spindle Taper, 7,000 RPM Maximum, 60-Tool Automatic Tool Changer, Mazatrol M-32 CNC Controls, Daiken Chiller, High Pressure Coolant, Chip Conveyor, s/n 92796, New 1990, Approx: 96" x 166" x 103" and 16,500 Lbs R&R has quoted $1,000 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
27 |
22418 |
14,250.00 |
|
ended |
| 590 |
 | Nakamura-Tome Model Slant Jr, CNC Chucking Turning Center, 15.75" Swing Over Slide Covers, 11.02" Swing Over Saddle, 11.81" Maximum Turning Length, 1-5/8" Round Bar Capacity, 2.17" Hole Thru Spindle, 10-Position Turret, 4,500 Maximum RPM, Fanuc O-T CNC Controls, Tape Reader, Coolant, Chip Conveyor, Foot Control, 6" 3-Jaw Chuck, 10 HP, Three Phase Motor and Controls, s/n 11315, Approx: 110" x 52" x 65" and 5,700 Lbs R&R has quoted $300 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
11 |
16275 |
2,600.00 |
|
ended |
| 620 |
 | New 2001Excel Model SMT-350, CNC Vertical Machining Center, (2) 19.6" x 10.2" T-Slotted Pallets, 13.7" X-Travel, 9.8" Y-Travel, 9.8" Z-Travel, 176 Lb Pallet Load Capacity, 14.96" Throat Depth, 16.1" Maximum From Spindle to Pallet, BT-30 Spindle Taper, 150 to 15,000 RPM Spindle, 20-Tool Automatic Tool Changer, Fanuc 21-M CNC Controls, Full Enclosure, Coolant, Chip Auger, High Pressure Coolant, 5 HP, Three Phase Motor and Controls, s/n ES350290T, Approx: 58" x 119" x 82" and 6,700 Lbs R&R has quoted $350 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
40 |
22315 |
12,751.00 |
|
ended |
| 650 |
 | Pratt & Whitney Model Tape Mate, Vertical Drilling and Tapping Machine, 25.6" x 15" T-Slotted Table, 20" X-Travel, 15" Y-Travel, 8.5" Z-Travel, 440 Lb Maximum Table Load, 15.5" Maximum From Spindle Nose to Table Surface, 3/4" Maximum Drilling in Mild Steel, 1/8" to 5/8" Diameter Maximum Tapping Capacity in Mild Steel, 30-Taper Spindle, 6,000 Maximum RPM, Fanuc System 3M CNC Controls, Table Guards, Coolant, RS232 Port, Approx 7-1/2 HP, Three Phase Motor and Controls, s/n F-420312, Approx: 72" x 86" x 80" and 5,000 Lbs R&R has quoted $200 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
19 |
22418 |
2,700.00 |
|
ended |
