| Item |
Photo (Off) |
Description |
Bids |
High
Bidder |
Current
Amount |
Next Bid
Required |
Your
Bid |
Your
Maximum |
| 1 |
 | Kalamazoo Model 20RWF, Vertical Band Saw, 21" x 21" Tilting Table, 19-3/4" Throat, 9-1/2" Maximum Under Blade Guides, Variable Speeds: 190 to 3,600 FPM, Startrite Model BSO-16 Blade Welder, Three Phase Motor and Controls, s/n 61426, Approx: 25" x 55" x 77" and 1,200 Lbs R&R has quoted $50 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
15 |
22418 |
1,250.00 |
|
ended |
| 410 |
 | Taiwan Horizontal Band Saw, Approx 9" x 10" Capacity, 9" Round Capacity, 3/4" Wide Blade, Angle Vise, Belted Speeds, 1 HP, Single Phase Motor and Controls, s/n na R&R has quoted $50 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
17 |
21180 |
320.00 |
|
ended |
| 470 |
 | K.O. Lee Model 718HG, Hydraulic Surface Grinder, 20" Longitudinal Table Travel, 7-1/4" Cross Table Travel, 8" Maximum Diameter Wheel Capacity, 16" Maximum Under 8" Wheel to Table Top, 6" x 14" Permanent Magnetic Chuck, Coolant, Approx 1-1/2 HP, Three Phase Motor and Controls, s/n 11110-567 R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
10 |
17182 |
386.00 |
|
ended |
| 530 |
 | Bridgeport Vertical Milling Machine, 9" x 42" T-Slotted Table, 24" Longitudinal Table Travel, 12" Cross Table Travel, 13" Vertical Adjustment of Knee, R8 Spindle Taper, Belted Speeds: 80 to 2,720 RPM, 1 HP, Three Phase Motor and Controls, s/n 79581, with Setco Model SPL Milling Attachment, 3,600 RPM, 3 HP, with Insert Type Shell Mill, s/n 108808, Approx: 75" x 68" x 72" and 2,500 Lbs R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
14 |
16117 |
801.00 |
|
ended |
| 545 |
 | Cutting Machine Model LTN-2160, Cut-Off Saw, 16" Maximum Wheel Size, Angle Table Vise, 5 HP, Three Phase Motor and Controls, s/n 9618 |
11 |
20268 |
80.00 |
|
ended |
| 580 |
 | Sharpe Model VH25, Vertical/Horizontal Milling Machine, 10" x 51" T-Slotted Table, 22" Longitudinal Table Travel, 17" Cross Table Travel, 19" Vertical Adjustment of Knee, Both Spindles are NST 40-Taper, Vertical Milling Specs: Variable Speeds: 60 to 4,500 RPm, SOny Millman 2-Axis DRO, Horizontal Milling Specs: 55 to 1,230 RPM, Coolant, One Shot Lube, Power Table Feed, 2 HP, Three Phase Motor and Controls, s/n 79120058, Approx: 72" x 72" x 92" and 4,500 Lbs R&R has quoted $150 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
15 |
20049 |
3,211.00 |
|
ended |
| 610 |
 | Charmilles Model E110 "Eledorada", Sinker Type Electrical Discharge Machine, 13.8" x 9" Table, 7.9" Longitudinal Travel, 4.7" Cross Table Travel, 220 Lb Maximum Table Load, 21" x 14" x 8" Inside Tank Dimensions, 9.5" Workhead Backslide Travel, 3.9" Quill Travel, System 3R Type Electrode Holder, 5" x 10" Permanent Magnetic Chuck, Charmilles IsoPulse P25 Power Supply, Microfin P12-25 Controls, Vidmar Maple Top Bench and Cabinet Base, s/n 54565, Approx: 62" x 31" x 80" and 1,800 Lbs R&R has quoted $200 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
8 |
16142 |
1,061.00 |
|
ended |
| 625 |
 | Van Norman Model 2R3-28, Universal Milling Machine, 12" x 50" T-Slotted Table, 24" Longitudinal Table Travel, 12" Cross Table Travel, 19" Vertical Knee Adjustment, 6-Table Down Feeds, 50-Taper Spindle, 16-Spindle Speeds: 55 to 2,000 RPM, Universal Head, Head Swivels 90 Degrees, s/n na, with Arbor Support, Please Note: Not in Service, Approx: 74" x 74" x 76" and 4,000 Lbs R&R has quoted $150 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
13 |
12186 |
625.00 |
|
ended |
| 645 |
 | Ex-Cell-O Model 602, Vertical Milling Machine, 9" x 42" T-Slotted Table, 22-1/2" Longitudinal Table Travel, 14" Cross Table Travel, 12" Vertical Knee Adjustment, 6" Quill Travel, Kwik-Switch II Spindle Taper, Variable Spindle Speeds: 85 to 4,000 RPM, 3-Spindle Feeds: .0015", .006", and .003", 2 HP, Three Phase, s/n 6029904, Please Note: Not in Service, Approx: 60" x 63" x 81" and 2,500 Lbs R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
11 |
7692 |
925.00 |
|
ended |
| 680 |
 | LeBlond Regal Engine Lathe, "Servo-Shift", 19" x 84" Rated Capacity, 19-1/4" Actual Swing Over Ways, 12-1/4" Swing Over Cross Slide, 84" Between Centers, 45 to 4,500 RPM, 1-3/4" Hole Thru Spindle, 48-Threads: 2 to 112 IPM, 48-Feeds: .059" to .0032", 12" 3-Jaw Chuck, 15" 4-Jaw Chuck, Tailstock, Steady Rest, Micro Carriage Stop, Hardways, Chip Pan, 10 HP, Three Phase Motor and Controls, s/n 8E-2724, Approx: 138" x 43" x 55" and 9,500 Lbs R&R has quoted $200 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
11 |
22418 |
2,500.00 |
|
ended |
| 690 |
 | Index Model 645 Vertical Milling Machine, 9" x 40-1/2" T-Slotted Table, 21" Longitudinal Travel, 12" Cross Table Travel, 16" Vertical Adjustment of Knee, 6" Quill Travel, R8 Spindle Taper, Belted Speeds: 80 to 2700 RPM, Power Longitudinal and Cross Feeds, One Shot Lube, 1 HP, Three Phase Motor and Controls, s/n 12233, Approx: 58" x 54" x 82" and 2,500 Lbs R&R has quoted $100 for disconnect and basic lift and load of this item. Please call Brian at 612-770-2598 with any questions. |
12 |
18136 |
625.00 |
|
ended |
