| Item |
Photo (Off) |
Description |
Bids |
High
Bidder |
Current
Amount |
Next Bid
Required |
Your
Bid |
Your
Maximum |
| 30 |
 | NEW 1999 Schold Model 60HP/20HP, Co-Axial Dispersing Machine, 48" Diameter Bow Tie Type Mixing Attachment, Dual Tub Position Type, Approx 3-3/4" Diameter Carbon Steel Shaft, Approx 60" Shaft From Bottom of Attachment to Casting, Variable Speed: 18 to 125 RPM and 626 to 1,600 RPM, 9" Height of Impeller Off of Floor, Air Over Oil Hydrualic Rise, 125Lbs Maximum Pressure, (2) Motors Including: (1) 60HP and (1) 20HP, s/n S4687, Approx: 128" x 113" x 118" and 10,000 lbs. |
11 |
22438 |
410.01 |
|
ended |
| 83 |
 | Deckel Model GK21 Pantograph. Three Dimensional Machine, 1:10 Minimum Copy Ratio, 1: 1 1/2 Maximum Copy Ration, 8"x13 1/4" Cutting Table, 14" Maximum Height of Work, 6" Longitudinal Travel of Table, 12" Cross Travel of Table, 17 3/4"x12 3/4" Copy Table, 475 to 20,000 RPM Spindle, S/N: 4600-5375. Approx 40"x42"x57" Dan Castonguay has quoted $75 for a basic lift and load of this item. Please call Dan with rigging related questions 612-803-4350 |
23 |
22169 |
1,376.00 |
|
ended |
| 113 |
 | Ruvo Model 975 Articulated Arm Router. 79"x32" Work Area, 2 1/2" Vertical Adjustment of Head, 2HP 208-230/460 Volt 3-Phase Motor and Controls, S/N: 119. Approx 93"x67"x66" Dan Castonguay has quoted $75 for a basic lift and load of this item. Please call Dan with rigging related questions 612-803-4350 |
6 |
21906 |
80.00 |
|
ended |
| 128 |
 | Ingersoll Rand Model SDR50 Compressed Air Dryer. 5 to 250 psi Operating Range, 120 Degree Max Inlet and Ambiant Temperature, R134a Refrigerant, 115 Volt, S/N: na. Approx 25"x24 1/2"x24" |
10 |
12007 |
459.00 |
|
ended |
| 133 |
 | Deckel Model GK21 Pantograph Machine. Three Dimensional Machine, 1:10 Minimum Copy Ratio, 1: 1 1/2 Maximum Copy Ration, 8"x14" Cutting Table with 10"x5" Permanent Magnetic Chuck, 14" Maximum Height of Work, 6" Longitudinal Travel of Table, 12" Cross Travel of Table, 17 3/4"x12 3/4" Copy Table, 475 to 20,000 RPM Spindle, S/N: 7196 Approx 40"x42"x57" Dan Castonguay has quoted $75 for a basic lift and load of this item. Please call Dan with rigging related questions 612-803-4350 |
14 |
8263 |
1,311.00 |
|
ended |
| 140 |
 | Dake Model Tiger 350 CNC FE Cold Saw. 14" Diameter Blade, 4"x7" Capacity in Rectangles, 4"x4" Capacity in Squares, 4 1/4" Capacity in Rounds, (4) Blade Speeds: 15, 30, 45 and 90 RPM, 5" Max Under Blade, 7" Vise Capacity, Approx 20" Max Feed Stroke, Coolant, Drip Pan, 3.3HP 480 Volt 3-Phase Motor and Controls, S/N: 027881 (New 199s) Approx 77 1/2"x36 1/2"x81" Dan Castonguay has quoted $75 for a basic lift and load of this item. Please call Dan with rigging related questions 612-803-4350 |
22 |
17466 |
1,750.00 |
|
ended |
| 145 |
 | Ikeda Model RM1575 Radial Arm Drill. 5'13" Capacity, 60 1/2"Maximum Column to Spindle, 54 1/2" Max From Spinde to Base, 14 1/2" Quill Stroke, 65 1/4"x36" Base, (12) Spindle Speeds: 30 to 1,500 RPM, (9) Spindle Downfeeds: .003" to .040" Per Revolution, #5 MT In Spindle, Box Table, Drill Chuck, 7 1/2HP 208 Volt 3-PHase Motor and Controls, S/N: S-769016 Location: Bentonville AR Nabholz Rigging has quoted $400 for a basic lift-and-load of this item. |
3 |
22072 |
3,100.00 |
|
ended |
| 170 |
 | 2001 Ty Miles Model MBLD10-30-120R Vertical Broach. 5-Ton Capacity, 30" Stroke, 120 FPM, Chip Conveyor, Quick Panel II Control, 20HP 230/460 Volt 3-Phase Motor and Controls, S/N: 010204. Approx 92"x100"x140" Dan Castonguay has quoted $200 for a basic lift and load of this item onto a double drop trailer. Please call Dan with rigging related questions 612-803-4350 |
10 |
22476 |
5,250.00 |
|
ended |
| 245 |
 | Ooya Model YMR-915 Radial Drill. 3'9" Capacity, 23"x36" T-Slotted Base, (9) Spindle Speeds: 50 to 1,500 RPM, (3) Down Feeds: .004" to .014" Per Spindle Revolution, Box Table, Chuck, S/N: 81471 Location: Bentonville AR Nabholz Rigging has quoted $400 for a basic lift-and-load of this item. |
5 |
22437 |
1,850.00 |
|
ended |
| 294 |
 | Twin Compartment Tumbling Machine. Variable Speed, 23"x30" Chambers, 3HP 220/440 Volt 3-Phase Motor and Controls, S/N: na. Approx 82"x52"x84" Dan Castonguay has quoted $50 for a basic lift and load of this item. Please call Dan with rigging related questions 612-803-4350 |
8 |
8283 |
85.00 |
|
ended |
| 300 |
 | Custom Tapping Machine with (5) Horizontal Tapping Spindles, (2) Angled Spindles, Machine Base and Electrical Controls. Approx 117"x76"x89" |
15 |
22158 |
500.00 |
|
ended |
