| Item |
Photo (Off) |
Description |
Bids |
High
Bidder |
Current
Amount |
Next Bid
Required |
Your
Bid |
Your
Maximum |
| 60 |
 | Clausing Model 1501 Engine Lathe. 15"x48" Capacity, 16" Actual Swing Ove Bed, 8 1/2" Swing Over Cross Slide, 48" Between Centers, 1 1/2" Hole Thru Spindle, Variable Spindle Speeds: 45 to 2000 RPM, Standard Threading, Buck 9" 3-Jaw Chuck, 8" 4-Jaw Chuck, Hard Ways, Tailstock, Chip Pam, 3-Phase Motor and Controls, S/N: 152092. Approx 90"x32"x49" Dan Castonguay has quoted $100 for a basic lift and load of this item. Please call Dan with rigging related questions 612-803-4350 |
13 |
22418 |
1,701.00 |
|
ended |
| 85 |
 | Takisawa Engine Lathe. 15" Swing Over Bed, 1.932" Hole Thru Spindle, 38" Between Centers, (12) Spindle Speeds: 40 to 1800 RPM, 12" 3-Jaw Chuck, Standard Threading, S/N: AY86004. Approx 94"x42"x54" Location: Greenville SC Advanced Rigging has quoted $200 for a basic lift-and-load of this item. |
7 |
22418 |
1,540.00 |
|
ended |
| 115 |
 | Hardinge Model TFB Turning Facing Boring Lathe. 11" Swing Over Bed, 6 1/2" Swing Over Cross Slide, 22" Between Centers, 1 3/8" Hole Thru Spinele, 5C Spindle Nose, Variable Spindle Speeds to 3,000 RPM, Varialbe Carriage Feed, 1 1/2HP 220 Volt 3-Phase Motor and Controls, S/N: 1293. Approx 69"x30"x58" Dan Castonguay has quoted $75 for a basic lift and load of this item. Please call Dan with rigging related questions 612-803-4350 |
14 |
8216 |
232.00 |
|
ended |
| 160 |
 | American Tool Works "Pacemaker" 14x30 Engine Lathe, 16" Actual Swing Over Bed, 10" Swing Over Cross Slide, 32" Between Centers, 32" Between Centers, 1-3/4" Hole Thru Spindle, 18 Speeds 17-1000 RPM, 2-Axis Accurite Quickcount II DRO, Will Cut 48 Standard Threads, Taper Attachment, Tailstock, 12" 3-Jaw Buck Chuck, 12" Union 4-Jaw Chuck, S/N 69459-46. Approx 96"x50"x66" and 10,000 lbs Dan Castonguay has quoted $150 for a basic lift and load of this item. Please call Dan with rigging related questions 612-803-4350 |
20 |
20029 |
2,900.00 |
|
ended |
