| Item |
Photo (Off) |
Description |
Bids |
High
Bidder |
Current
Amount |
Next Bid
Required |
Your
Bid |
Your
Maximum |
| 50 |
 | Bridgeport Series 1J Vertical Milling Machine. 9"x42" T-Slotted Table, 24" Longitudinal Table Travel, 13" Cross Table Travel, 13" Vertical Knee Adjustment, 5" Quill Travel, (8) Belted Speeds: 80 to 2720 RPM, R8 Spindle Taper, One Shot Lube, 1HP 220/440 Volt 3-Phase Motor and Controls, S/N: 58974. Approx 58"x60"x80" and 2200 lbs. Note: Shaping Attachment Not Included. |
21 |
22363 |
550.00 |
|
ended |
| 75 |
 | Logan Model 1922 Engine Lathe. 11" Swing Over Bed, 6" Swing Over Cross Slide, 1 1/4" Hole Thru Spindle, 36" Between Centers, (4) Belted Speeds, Standard Threading, 6" 3-Jaw Chuck, 2 1/2" 4-Way Tool Post, 3/4HP 110 Volt Motor and Controls, S/N: 64889. Approx 65"x30"x50" |
7 |
22376 |
310.00 |
|
ended |
| 100 |
 | MSC Model 0951136 Abrasive Cut Off Machine. 16" Blade Capacity, Table Vise, 5HP 220 Volt 3-Phase Motor and Controls, S/N: na. Approx 24"x45"x73" |
9 |
17343 |
235.00 |
|
ended |
| 174 |
 | Brobo Model F Cold Saw. 14" Blade, Twin Pneumatic Vises, 220/440 Volt Motor, S/N:na |
19 |
22308 |
977.00 |
|
ended |
| 175 |
 | Herbert Model C31078 Turret Lathe. 13" Swing Over Bed, 7" Swing Over Cross Slide, 1" Hole Thru Spindle, 17 1/2" Max Between Spindle And Turret Faces, 32 to 3435 RPM Spindle, (6) Feeds: .002" to .024" Per Spindle Revolution, 6-Position Turretet, Pneumatic Collet Closer, ASsorted Tooling, 220 Volt 3-Phase Motor and Controls, S/N: DE2023.7.1. Approx 80"x56"x48" |
19 |
22263 |
300.00 |
|
ended |
| 200 |
 | Bridgeport Vertical Milling Machine. 9"x32" T-Slotted Table, 14" Longitudinal Table Travel, 9" Cross Table Travel, 13" Vertical Knee Adjustment, 4" Quill Travel, (7) Belted Speeds 275 to 4250 RPM, Power Longitudinal Feed, Jacobs No. 16 Drill Chuck 1/8" to 5/8" Capacity, 1/2HP 220/440 Volt 3-Phase Motor and Controls, S/N: 5485. Approx 52"x50"x77" and 1500 lbs |
9 |
22263 |
100.00 |
|
ended |
| 225 |
 | Cold Saw. 12" Blade Capacity, Twin Table Vises, 1.2KW 220 Volt 3-Phase Motor and Controls, Approx 23"x38"x72" |
12 |
14199 |
401.00 |
|
ended |
| 300 |
 | Do-All Model ML Vertical Band Saw. 16" Throat, 24 1/4"x24 1/4" Tilting Table, 7 1/4" Under Guides, 120" Blade, Variable Blade Speeds from 50 to 1600 FPM, Blade Grinder/Welder, 220 Volt 3-Phase Motor and Controls, S/N: 5014933. Approx 43"x34"x75 1/2" |
14 |
22263 |
775.00 |
|
ended |
| 325 |
 | Cincinnati 4' 9" Radial Arm Drill. 48" Max Between Spindle and Column, 50" Max Under Spindle, 25"x48" T-Slotted Table, 8" Quill Travel, (9) Spindle Speeds 60 to 1200 RPM, (4) Quill Feeds .004" to .020" Per Spindle Revolution, #4 Morse Taper In Spindle, Hand Clamping, 3HP 220/440 Volt 3-Phase Motor and Controls, S/N: R2658. Approx 100"x59"x93" |
2 |
22384 |
12.50 |
|
ended |
